Endless Pools Swim Spa Maintenance: Mineraluxe Guide
Time to read 10 min
Practical guide • Endless Pools swim spas
Inviting water starts with a routine you understand.
Endless Pools swim spa maintenance comes down to four habits: testing the water, balancing it, maintaining sanitizer and cleaning the filters. Mineraluxe Swim Spa helps organize complementary care without replacing water tests or disinfection.
In this guide, Piscine Hippocampe explains what to check, which products to consider and how to adapt your routine to your water volume, temperature and swimming sessions.
Understand the routine →Explore the maintenance kit →
1. Start with the right model, volume and temperature
A swim spa should not simply be treated as an oversized hot tub. It holds more water, swimming sessions may last longer, and its temperature varies with exercise, play or relaxation. Several swimmers, sunscreen and body residues can change sanitizer demand quickly.
Before choosing a dose, record the model, year, water volume and actual temperature. Check the manual supplied with your unit. A specification for another model year or a version with a treadmill may give a different water capacity. Exterior length does not establish usable water volume.
- Single swim basin: calculate additions using its actual volume.
- Two-basin model: test and treat each compartment separately.
- Indoor installation: confirm the appropriate sanitizer and stabilizer needs.
- Outdoor installation: consider sunlight, debris and changing usage.
Keep this information with your test records. It helps you see what changes after guests visit, after a long session or after refilling, and gives our team useful information when you need advice.
2. Which water parameters should you monitor?
Free chlorine, pH, total alkalinity and calcium hardness have different jobs. Correcting one at random may complicate the others. Follow your Endless Pools model’s manual and your sanitizer label, then investigate why a reading changes.
| Parameter | What it tells you | How to use the result |
|---|---|---|
| Free chlorine | Sanitizer still available in the water. | Test before use; adjust according to the label, model and temperature. |
| pH | The water’s acid/base balance. | An incorrect pH can affect comfort, equipment and treatment effectiveness. |
| Total alkalinity | How well water resists pH changes. | Check it when pH becomes difficult to stabilize. |
| Calcium hardness | The amount of dissolved calcium. | Use your model’s target to manage deposits and water balance. |
| Stabilizer (CYA) | Protection from sunlight and possible accumulation. | Monitor it when using stabilized chlorine; do not increase it without testing. |
| Total dissolved solids (TDS) | How dissolved substances accumulate. | Consider source water, products and your manual before deciding to drain. |
The Piscine Hippocampe protocol previously described in this article distinguished swimming around 80–85°F from warmer use starting around 90°F. This helps explain changes in treatment demand, but temperature alone does not replace your model’s instructions. Reconfirm your targets when you substantially change temperature or usage.
How to get more reliable test results
Use unexpired strips stored dry in their closed container. Follow the manufacturer’s immersion and reading times. Avoid testing right beside a recent chemical addition, and allow the prescribed circulation time before checking a correction. Record the reading before adding anything. Repeat an unexpected result rather than doubling a dose.
Mineraluxe 6-in-1 test strips make home checks convenient. The Water-i.d. PT500 tester is another option for the parameters it measures. In-store testing complements these checks when water becomes difficult to balance.
3. The Mineraluxe routine: four complementary roles
Water care becomes easier when each product’s purpose is clear. Mineral treatment supports surface care, oxidizer treats organic residues, sanitizer maintains disinfection, and balancing products adjust water chemistry. None eliminates the need for the other roles.
Swim Spa Cube: mineral care
Designed for swim spas to help limit deposits and scale on surfaces and equipment.
View product →
Oxygen Swim Spa: oxidation
Complements the cubes and helps break down organic residues to support water clarity.
View product →
Sanitizer: guided by testing
Chlorine granules allow measured manual additions. Confirm suitability for your model and installation.
View product →Swim Spa Cubes and hot tub Cubes: choose the right product
Swim Spa products are intended for the swim basin’s routine. Do not copy their doses into the small hot tub compartment of a two-basin unit. Confirm each compartment’s volume, temperature and required products.
Calculate doses without overtreating
The Mineraluxe Swim Spa manufacturer sheet provides starting guidelines. The label on your current container remains the reference. Our team can help adapt the program to usage and test results.
| Product | Manufacturer’s starting guideline | What changes the dose |
|---|---|---|
| Swim Spa Cube | Up to 15,000 L: 2 cubes initially, then 1 cube weekly. | Below 7,000 L or with infrequent use, the sheet allows for one cube every two weeks. |
| Oxygen Swim Spa | 125 g per 10,000 L weekly; approximately 250 g per 10,000 L when maintained above 30°C. | Temperature and bather load; follow the label and advice for your basin. |
| Chlorine | An amount based on the test result and compatible sanitizer label. | Measured residual, volume, temperature and usage. No fixed dose to add automatically. |
Oxygen calculation example: 5,000 L is half of 10,000 L, so the 125 g reference becomes 62.5 g. At the stronger 250 g reference, it becomes 125 g. This proportional calculation applies to the product measured in grams; it does not mean you should cut a cube. Confirm the cube schedule separately.
Apply each product according to its directions with the required circulation. Never mix concentrated chemicals. Follow instructions for keeping the cover open, dispersing products and returning to swimming. There is no single waiting time that applies to every treatment.
4. Which balancing product should you choose?
A balancing product addresses a specific reading. If the result is already in range, adding more may offer no benefit. Make measured corrections, allow the required circulation and retest before proceeding.
| Test result | Product to consider | What to check |
|---|---|---|
| Low total alkalinity | Mineraluxe Alkalinity Plus | Recheck pH; the two parameters are related. |
| High pH | Mineraluxe pH Minus | This product can also reduce alkalinity. |
| Low pH | Mineraluxe pH Plus | Check alkalinity before making repeated additions. |
| Calcium below the model’s target | Mineraluxe Calcium Hardness Plus | Do not raise calcium to a target intended for another series. |
Prepare your supplies: Swim Spa kit + test strips
The Mineraluxe swim spa kit brings together 13 Swim Spa Cubes and a 1.5 kg container of Oxygen Swim Spa. Add 6-in-1 test strips to connect your maintenance actions to measured results.
Swim spa maintenance kit
Cubes and Oxygen in one kit. How long it lasts depends on doses and actual usage.
View product →
6-in-1 test strips
A container of 50 strips for checks between comprehensive water tests.
View product →Adds one of each product. Sanitizer and balancing products are sold separately and should be selected for your model and test results. No fixed maintenance duration is promised.
5. Follow a simple maintenance schedule
A schedule reminds you what to check; test results determine corrections. After several swimmers or during the first week of a new routine, check more often instead of assuming treatment needs remain unchanged.
| When | Useful actions |
|---|---|
| Before every swim | Check sanitizer, pH, clarity, temperature and circulation. Wait if conditions are unsuitable. |
| After heavy use | Retest and adapt treatment to the results. |
| Weekly | Follow the Cube/Oxygen schedule, check alkalinity, clean baskets and rinse cartridges. |
| About monthly | Deep-clean cartridges as needed and according to the label; inspect the cover and accessible surfaces. |
| Every 4–6 weeks | Our guideline for an in-store test; seek advice sooner if problems arise. |
| At refilling or after major changes | Reconfirm volume, source water, targets and products. Reassess needs after temperature or usage changes. |
In-store testing: understand the whole picture
At Piscine Hippocampe in Delson, a water test helps interpret results alongside your basin’s history. It is especially useful when pH keeps shifting, chlorine disappears rapidly, deposits develop or corrections no longer seem to work.
Bring a sample in a clean container, taken below the surface away from returns and recent additions. Bring it promptly with the model, volume, temperature, last refill date and products used. Photos of labels or deposits may also help.
6. Clean cartridges support effective filtration
Loaded cartridges can reduce flow. Adding chemicals does not remove residues trapped in the filter media. Rinse regularly with gentle water pressure, cleaning between the pleats, then use a suitable cleaner for persistent oils and deposits.
Filter Revive: cartridge cleaning
Complements rinsing by targeting oils and contaminants in the media. Follow dilution, cleaning time and rinsing directions.
View product →
Cleanse & Drain: before draining
A plumbing cleaner to consider when a purge is indicated. Match the dose and procedure to your water volume.
View product →Inspect pleats, end caps and bands. Replace damaged cartridges or those that can no longer be cleaned. For a replacement such as the Endless Pools 77728 set, verify the part number and compatibility: not every cartridge fits every model. Follow service schedules for any installed UV, ozone or mineral equipment.
Starting up or switching to Mineraluxe
Confirm your model’s filling and startup procedure first. Check water level, circulation and alarms. Test source water and balance it before continuing with the prescribed routine.
A plumbing purge may be appropriate for certain residues, but do not apply a fixed number of bottles to every basin. Use Cleanse & Drain only according to its label and an appropriate installation procedure. Monitor filters and test results more closely during the first days of a conversion.
7. Cloudy water, foam or deposits: what to check first
Stop swimming if water is cloudy, surfaces become slippery or sanitizer is outside the required range. Investigate before combining treatments: similar symptoms may have different causes.
| What you notice | Check first | Next step |
|---|---|---|
| Cloudy water | Sanitizer, pH, filters, flow and recent usage. | Test, clean filters and establish a correction for your model. |
| Persistent foam | Laundry residues, body products, water balance and age. | Reduce contamination, clean filters and have water tested. |
| Deposits or rough surfaces | pH, alkalinity and calcium hardness. | Identify the deposit before scrubbing or adding a product. |
| Chlorine falls quickly | Usage, temperature, organic residues and test accuracy. | Test more often and inspect filtration; seek advice if it persists. |
| Unusual odour or discomfort | Sanitizer, pH and treatment history. | Do not automatically assume too much or too little chlorine; get a water test. |
| Low flow or error code | Water level, baskets, filters and troubleshooting instructions. | Follow your manual; contact service if circulation does not recover. |
Resume swimming only after correcting the cause and verifying clear water, normal circulation and suitable readings. If the problem returns, give our team your results and treatment history to avoid repeating ineffective corrections.
8. When should swim spa water be replaced?
Frequency depends on volume, usage, temperature and maintenance program. The four-to-five-month guideline used in some Piscine Hippocampe routines is a time to reassess water, not a mandatory full-drain interval for every model. Check your manual and test results before choosing partial or full replacement.
Plan for draining, cleaning, refilling and proper startup. Confirm the appropriate drainage location. In Quebec, arrange this before severe cold rather than waiting until a water issue forces an intervention in difficult conditions.
9. Vacations and Quebec winters: arrange regular checks
Before leaving
Have water checked, clean filters, verify the level and make sure the cover closes properly. Arrange for someone who can test the water and recognize circulation or heating alarms. Leave the targets, approved products and service number.
Use an away mode only as directed by your manual. Do not automatically multiply the chlorine dose before leaving. Treatment depends on the test and length of absence. Test again on return and restore the required conditions before swimming.
Keeping the swim spa running in winter
Heating, circulation and the cover need ongoing attention. Monitor alarms, temperature drops and snow accumulation according to cover instructions. A breakdown requires prompt action: contact service to protect the installation based on the weather and circumstances.
If closing the unit, arrange appropriate winterization. Emptying the basin does not necessarily remove water from plumbing, pumps and accessories. Simply cutting power to a filled unit during freezing weather is not a winterization procedure.
Two basins mean two routines
For a two-zone X2000 or E2000, keep separate records for the swim and hot tub compartments. Confirm each volume and required products. Do not transfer Swim Spa dosing automatically to the small hot compartment; it may require traditional hot tub products.
10. Mistakes that make maintenance harder
- Judging by appearance: test even when water looks clear.
- Dosing from exterior dimensions: confirm actual model capacity and configuration.
- Adding chlorine on schedule without a reading: let tests guide corrections.
- Confusing oxidation with disinfection: Oxygen complements the routine; sanitizer residual is still necessary.
- Correcting several parameters without waiting: follow circulation and retesting instructions.
- Neglecting filters: rinsing and deep cleaning serve different purposes.
- Using unapproved products or floaters: confirm approved accessories and sanitizers in your Endless Pools manual.
Frequently asked questions about Endless Pools swim spa maintenance
Does Mineraluxe replace chlorine?
No. Cubes and Oxygen complement maintenance. Maintain a compatible sanitizer at the prescribed level and keep testing, even with UV or ozone installed.
How often should water be tested?
Check sanitizer and pH before swimming and adapt monitoring to actual use. Check more often after several swimmers, refilling or changing the routine.
Should I add 250 g of Oxygen per 10,000 L all year?
That is not a universal dose. The manufacturer sheet distinguishes 125 g per 10,000 L from approximately 250 g when temperature exceeds 30°C. Follow the current label and your water’s needs.
Does the kit contain all sanitizing and balancing products?
It contains Swim Spa Cubes and Oxygen. Sanitizer, balancing products and strips are separate. This guide’s button adds the kit and one container of strips; choose other products based on testing.
Why does chlorine drop even with Mineraluxe?
Demand varies with temperature, usage and contaminants. Check test accuracy and cartridge condition too. Persistent losses call for testing and diagnosis rather than an automatic larger dose.
Must I drain cloudy water?
Not necessarily. Start with water tests, flow and filters. Water replacement is then considered according to the cause, results and model instructions.
A Mineraluxe routine for your Endless Pools
Bring your model, volume, temperature and a water sample to Piscine Hippocampe in Delson, on Montreal’s South Shore. Our team can help choose products and simplify your maintenance schedule.
450 632-8680 · service@piscinehippocampe.ca
Explore the Swim Spa kit →Keep reading
Technical references: Mineraluxe Swim Spa manufacturer sheet and Endless Pools Fitness Systems manual. Versions and equipment vary; use your unit’s manual and current product labels to guide treatment.
