Thermeau Prestige TH65 Pool Heat Pump – 65 000 BTU

The Thermeau Prestige TH65 pool heat pump is a residential pool heater designed in Quebec. Its reverse-cycle hot gas defrost helps manage frost on the evaporator in cool weather. The electronic thermostat lets you set the water temperature.

Useful features

• Brand and series: Thermeau Prestige; model TH65.
• Commercial designation of the offering: 65,000 BTU.
• Reverse-cycle hot gas defrost.
• Electronic self-diagnostic thermostat.
• Published capacity: 64,000 BTU/h at 80 °F air, 80 °F water, and 80% humidity.
• Power supply: 230 V, 60 Hz, single-phase.

Choosing the model for your pool

In the Thermeau guide, the TH65 is among the recommended options for a 12 × 24 ft inground pool. This indication does not replace a site assessment. Volume, wind, outdoor temperature, desired water temperature, and use of a solar cover affect sizing and heating time.

Understanding performance

At 50 °F air and 80 °F water, with 63% humidity, Thermeau publishes a capacity of 40,000 BTU/h for the TH65. BTU output is therefore not constant under all conditions. Compare units using the same test conditions.

Residential warranty

Prestige residential warranty: 5 years on parts and labor; 10-year limited warranty on the heat exchanger's titanium tube against corrosion, subject to the manufacturer's terms. Keep your receipt and follow the installation and winterization requirements.

Installation and winterization

Plan for a well-ventilated outdoor installation with access for maintenance. Have the connections, flow rate, and electrical circuit checked against the unit's nameplate. For winter, follow the Thermeau procedure to remove the water; a cover does not replace draining the unit.

Documentation

Thermeau Prestige specifications and selection guide · Thermeau maintenance and winterization

In the box

1 Thermeau Prestige TH65 pool heat pump. Confirm which accessories and connection supplies are needed for your installation before purchase.