MOOV Reversible MR80 pool heat pump – 80 000 BTU

MOOV Reversible MR80 Pool Heat Pump – 80,000 BTU

Extend your swimming season with the 80,000 BTU Moov Reversible MR80 pool heat pump.

Designed to efficiently heat residential pool water, the Moov Reversible range combines reverse-cycle defrosting, a spiral titanium heat exchanger, a dual-rotary compressor, and a mechanical design intended to provide stable, quiet operation.

With its 80,000 BTU capacity, the MR80 is an attractive option for homeowners who want to maintain a comfortable water temperature for longer in the spring and fall.

80,000 BTU heating capacity

The Moov MR80 offers a nominal capacity of 80,000 BTU, allowing it to heat and maintain the water temperature according to your installation conditions.

The actual performance of a heat pump varies, among other factors, according to:

• Pool volume
• Outdoor temperature
• Desired water temperature
• Humidity
• Wind exposure
• Sun exposure
• The number of circulation hours
• Whether or not a solar cover is used

Proper sizing is essential to achieve performance suitable for your pool.

Reverse-cycle defrosting

The Moov Reversible range uses a reversible defrost system. When frost forms on the evaporator, the heat pump can temporarily reverse its cycle to accelerate defrosting before resuming heating.

This technology is particularly useful at the beginning and end of the season, when outdoor temperatures are cooler.

Benefits

• Faster defrosting
• Fewer frost-related interruptions
• Better suited for operation during cooler periods
• Allows you to extend the swimming season even further

Spiral titanium heat exchanger

The Reversible range is equipped with a spiral-designed titanium heat exchanger. According to Moov, this design provides approximately 30% more heat exchange surface area, promoting heat transfer to the pool water.

Titanium also offers excellent corrosion resistance, making it particularly well suited for pool equipment.

Key benefits

• Efficient heat transfer
• Durable construction
• Excellent corrosion resistance
• Suited to a pool environment
• Heat exchanger installed in a PVC housing on the Reversible range

Fixed-speed dual rotary compressor

The Moov Reversible is a fixed-speed conventional heat pump rather than a Full-Inverter model. Moov uses a dual-rotor mechanism designed to balance vibrations produced during operation.

This design contributes to:

• Stable operation
• Reduced vibration
• Quieter operation
• A simple, proven mechanical design

Soundproof design

Moov uses vibration-absorbing materials and walls around the mechanical chamber to limit the noise produced by the heat pump's main components.

To help ensure quiet operation, it is also important to:

• Install the heat pump on a solid, level base
• Maintain the recommended clearances
• Ensure adequate air circulation
• Avoid placing the unit in an enclosed space
• Follow the manufacturer's installation recommendations

Smart control and connectivity

The Moov Reversible range is equipped with a smart control thermostat and provides Wi-Fi connectivity to make heat pump management easier.

The control system manages the temperature and operation of the unit according to the functions offered by the installed configuration.

A heat pump designed to extend the season

Reversible defrosting is a particularly valuable advantage in a climate where temperatures may be lower in spring and fall.

It allows the heat pump to better manage frost formation and continue heating when conditions remain within its operating range.

The importance of a solar cover

To optimize the performance of a heat pump, using a solar cover is highly recommended.

It helps to:

• Reduce heat loss overnight
• Limit evaporation
• Maintain a more stable water temperature
• Reduce the required operating time
• Retain more of the accumulated heat

Key features

Brand: Moov
Series: Reversible
Model: MR80
Type: Pool heat pump
Nominal capacity: 80,000 BTU
Technology: Fixed speed
Defrosting: Reverse cycle
Heat exchanger: Spiral titanium
Compressor: Dual rotary
Control: Smart thermostat
Use: Residential pool heating

Properly size your heat pump

The required capacity does not depend solely on the pool's water volume.

To select a suitable heat pump, you must also consider the region, the pool's exposure, the desired temperature, the desired season length, and the use of a solar cover.

A properly sized heat pump will generally reach the desired temperature more efficiently and maintain it more effectively when outdoor conditions become cooler.

Professional installation recommended

The heat pump must be installed in accordance with the manufacturer's instructions and applicable standards.

The installation must include, among other things:

• A solid, level base
• Sufficient airflow
• Adequate clearances around the unit
• Plumbing providing the appropriate flow rate
• Adequate condensate drainage
• An electrical circuit suitable for the unit
• Proper grounding

The electrical connection must be completed by a qualified professional.

Why choose the Moov Reversible MR80?

• 80,000 BTU capacity
• Reverse-cycle defrosting
• Spiral titanium heat exchanger
• Dual rotary compressor
• Fixed-speed design
• Sound-insulated mechanical chamber
• Smart control thermostat
• Designed to extend the swimming season
• Construction designed for residential pools

Enjoy your pool longer

The 80,000 BTU Moov Reversible MR80 heat pump offers an appealing combination of power, simplicity, and technologies designed to heat a residential pool.

Its reversible defrosting, titanium heat exchanger, and dual rotary compressor make it a practical solution for maintaining comfortable water temperatures and enjoying your pool longer throughout the season.

Available from Piscine Hippocampe.