Elastic pool closing system

Maintain your winter cover securely in place with this premium bungee cord system for pool closing, designed to simplify installation in the fall and facilitate opening in the spring.

Made in Quebec, this system uses durable bungee cords attached to a UV-treated rope to provide constant tension throughout the winter. It is suitable for several sizes of round, oval, and in-ground pools.

When the water level rises in the spring, the tension in the bungee cords helps the cover return to its position, promoting water drainage, cover drying, and removal.

Improved cover stability during the winter

The bungee cord system helps keep the cover evenly positioned around the pool, even when the water level is lowered for closing.

It helps to:

• Maintain even tension on the cover
• Reduce movement caused by wind
• Limit the accumulation of leaves and debris
• Support the cover as the water level changes
• Facilitate pool opening in the spring
• Avoid using an air pillow in many installations

Results may vary depending on the pool type, the cover used, the installation method, and winter conditions.

Spring lift function

As the snow melts and the pool water level rises, the system's tension helps the cover gradually rise.

This action may help:

• Reduce stagnant water pockets
• Facilitate the natural drainage of water
• Speed up cover drying
• Simplify removal and storage
• Reduce the time required to open the pool

The cover must nevertheless be inspected and cleared of major debris before removal.

Made in Quebec

This system is made in Quebec with materials selected to withstand winter conditions.

Main advantages

• Made in Quebec
• Heavy-duty bungee cords
• UV-resistant rope
• Cold-weather design
• Reusable installation
• Several sizes available
• Compatible with different pool shapes

Simple and practical installation

The system is designed to be installed around the pool and connected to the attachment points on the compatible winter cover.

Proper installation helps maintain evenly distributed tension without adding heavy or bulky accessories.

General recommendations

1. Complete the pool closing process.
2. Lower the water level according to the applicable recommendations.
3. Install and center the winter cover.
4. Position the bungee cord system around the pool.
5. Attach the hooks to the designated points on the cover.
6. Distribute the tension evenly.
7. Regularly inspect the installation during the winter.

Avoid applying excessive tension to any specific section of the cover.

Recommended checks before purchase

Before choosing your bungee cord system, check:

• The shape of the pool
• The exact diameter of a round pool
• The length and width of an oval or inground pool
• The dimensions of the winter cover
• The position of the hooks or grommets
• The condition of the existing rope and bungee cords
• The fastening method used

The system must be selected according to the actual dimensions of the pool and cover.

System care

To extend the life of the bungee cords:

• Inspect the hooks before each installation
• Check the condition of the rope
• Replace stretched or damaged sections
• Clean the components after removal
• Allow to dry completely before storing
• Store in a dry place protected from sunlight
• Avoid all contact with sharp objects

Replacement hooks and bungee cords can be purchased separately as needed.

Main advantages

• Bungee cord system for winter cover
• Suitable for round, oval, and inground pools
• Several sizes available
• Maintains constant tension
• Helps stabilize the cover during winter
• Helps the cover rise in spring
• Reduces water and debris accumulation
• Can replace the use of an air pillow
• Simple, reusable installation
• Made in Quebec
• Designed for winter conditions

Important

This system is designed to hold a compatible winter cover or leaf net in place.

This is not a safety cover. The cover and bungee cord system must never be used to support the weight of a person, child, or animal.

Technical specifications

Product
Pool cover bungee cord system

Use
Closing and winter protection

Manufacturing
Quebec

Main materials
UV-resistant rope, bungee cords, and fastening hooks

Compatible pools
Round, oval, and inground pools according to the selected size

Reusable installation
Yes

Safety cover
No

Package contents

• 1 pool cover bungee cord system
• Size corresponding to the selected dimensions
• Fastening hooks installed according to the model configuration

The winter cover and other closing accessories are sold separately, unless otherwise indicated.

Simplify closing and opening your pool

This premium bungee cord system offers a practical solution for keeping your winter cover in place throughout the cold season.

Thanks to its Quebec manufacturing, flexible tension, and numerous available sizes, it helps protect the pool during winter and makes removing the cover easier in spring.

Available from Piscine Hippocampe in several sizes.