REVA pool cleaning robot – Gyroscope, mobile app and 2-micron filtration

REVA Pool-Cleaning Robot - Gyroscope, Mobile App, and 2-Micron Filtration

Enjoy a clean pool with minimal intervention thanks to the REVA pool-cleaning robot, an intelligent device designed to efficiently clean the floor, walls, and waterline.

Thanks to its dual-layer filtration, which can retain particles as fine as 2 microns, gyroscope-assisted navigation, and advanced mapping technologies, REVA optimizes each movement to ensure complete pool coverage.

Its mobile app also allows you to schedule and customize cleaning cycles directly from a compatible smartphone.

Complete cleaning of the floor, walls, and waterline

The REVA robot is designed to clean the pool’s main surfaces:

• Pool floor
• Walls
• Waterline
• Gentle slopes
• Some compatible beach-entry areas

Its rubber tracks and propulsion system help it maintain good traction on surfaces during the cleaning cycle.

The robot’s ability to cross certain slopes, steps, or transitions may vary depending on the pool’s shape, surface, and layout.

Dual-layer filtration down to 2 microns

REVA uses a dual-layer filtration system designed to collect large debris as well as much finer particles present in the water.

It can notably collect:

• Leaves
• Insects
• Sand
• Dust
• Pollen
• Small debris
• Fine suspended particles

Its filtration fineness of up to 2 microns helps keep the water clearer while reducing the amount of dirt that remains in the pool.

To maintain effective suction, the filter must be removed, emptied, and rinsed regularly.

AquaSmart 2.0 intelligent navigation

AquaSmart 2.0 technology helps the robot organize its movements to avoid unnecessary passes and efficiently cover the pool.

This intelligent navigation helps to:

• Reduce missed areas
• Optimize movement
• Improve pool coverage
• Limit unnecessary repetition
• Maximize cycle efficiency

Auto-X Mapping technology

The Auto-X Mapping system analyzes the pool’s layout to adapt the robot’s route to the pool’s dimensions and shape.

This mapping allows REVA to work more methodically than a robot that relies solely on random movement.

Built-in gyroscope

The built-in gyroscope helps the robot determine its orientation and maintain a stable trajectory while cleaning.

It notably helps to:

• Stabilize movement
• Facilitate changes in direction
• Optimize trajectories
• Reduce erratic movement
• Improve surface coverage

Control with the mobile app

The REVA can be controlled using a compatible mobile app.

Depending on the available features, the app allows you to:

• Start a cleaning cycle
• Select the cleaning mode
• Program cycles
• Schedule pool maintenance
• View certain operating information
• Control the robot remotely when it is connected

Feature availability may vary depending on the app version, the phone used, and connection quality.

Suction power of up to 66 GPM

The REVA's pumping system can provide a flow rate of up to 66 gallons per minute.

This circulation helps the robot efficiently vacuum debris from surfaces while directing water toward the integrated filtration system.

Actual performance may vary depending on:

• Filter cleanliness
• Amount of debris
• Cleaning mode
• Pool shape
• Condition of the brushes and tracks
• Operating conditions

Brushless motors

The robot is equipped with brushless motors designed to provide efficient and durable performance.

Advantages of Brushless motors

• Energy-efficient operation
• Reduced number of mechanical components subject to wear
• Consistent performance
• Low maintenance
• Increased durability

HyperGrip rubber tracks

The HyperGrip Rubber Tracks provide superior traction on several types of pool surfaces.

They help to:

• Improve grip on the bottom
• Make climbing the walls easier
• Maintain a stable trajectory
• Reduce slipping
• Improve waterline cleaning

Results may vary depending on the surface, wall slope, and pool geometry.

Lightweight and easy to handle

Weighing approximately 12.5 lb, the REVA is lighter than several pool-cleaning robots in its category.

This design makes it easier to:

• Placing it in the water
• Removing it from the pool
• Transport
• Basket cleaning
• Storage after use

When removing it, always use the robot's handle, not the power cable.

Full filter indicator

The REVA is equipped with an indicator that signals when the filter should be checked or cleaned.

A clean filter helps maintain:

• Effective suction
• Adequate water flow
• Good filtration quality
• Consistent performance
• Optimized cleaning cycles

Suitable for in-ground and above-ground pools

The REVA robot may be suitable for several in-ground and above-ground pools measuring up to approximately 38 ft long.

Before purchasing, it is recommended to consider:

• Pool length
• Depth
• Pool shape
• Type of surface
• Presence of steps or benches
• Wall slope
• Location of the electrical outlet
• Cable length

Simple operation

1. Install the power supply in a dry and safe location.
2. Unwind the cable to reduce the risk of tangling.
3. Place the robot in the water.
4. Allow the air to escape completely.
5. Select the desired cycle.
6. Let the robot perform the cleaning.
7. Remove it using its handle.
8. Empty and rinse the filter after use.

Always follow the manufacturer's instructions and the safety rules in the user manual.

Recommended maintenance

To maintain the robot's performance:

• Rinse the filter after each cycle
• Remove hair and debris from around the brushes
• Check the tracks
• Inspect the cable regularly
• Rinse the robot with clean water
• Avoid leaving the robot in the pool permanently
• Store the power supply away from water
• Protect the unit from freezing
• Store the robot in a dry place

Key benefits

• Smart robotic pool cleaner
• Cleans the floor, walls, and waterline
• Dual-layer filtration down to 2 microns
• AquaSmart 2.0 navigation
• Auto-X Mapping technology
• Built-in gyroscope
• Mobile app control
• Pumping flow rate up to 66 GPM
• Brushless motors
• HyperGrip rubber tracks
• Full filter indicator
• Lightweight, approximately 12.5 lb
• 51 ft cable
• Suitable for pools up to approximately 38 ft

Technical specifications

Product
Automatic robotic pool cleaner

Model
REVA

Compatible pool types
Compatible in-ground and above-ground pools

Maximum recommended pool length
Up to approximately 38 ft

Cleaning areas
Floor, walls, and waterline

Filtration system
Dual-layer filtration

Filtration fineness
Up to 2 microns

Pumping flow rate
Up to 66 GPM

Navigation
AquaSmart 2.0 and Auto-X Mapping

Built-in gyroscope
Yes

Mobile app
Yes

Motor type
Brushless motors

Track type
HyperGrip Rubber Tracks

Full filter indicator
Yes

Cable length
51 ft

Approximate weight
12.5 lb

Warranty

• Power supply: 2 years
• Motor: 2 years
• Pump: 2 years

The warranty is subject to the manufacturer's terms and conditions. Damage caused by misuse, freezing, improper storage, normal wear, or chemical imbalance may be excluded.

Package contents

• 1 REVA robotic pool cleaner
• 1 power supply
• 1 51 ft power cable
• 1 dual-layer filtration system
• Manufacturer documentation

Accessories not listed are sold separately unless otherwise stated.

A cleaner pool with less effort

The REVA robotic cleaner combines ultrafine filtration, intelligent navigation, and excellent traction to ensure thorough pool maintenance.

With its built-in gyroscope, advanced mapping, and mobile app control, it offers a practical solution for significantly reducing the time spent on manual cleaning.

Available now at Piscine Hippocampe.