Your well-being, our expertise. Since 1977.

MOOV  |  SKU: MOOVMCSALTPEN

MOOV Salt Pen 4 en 1 – Salinité, pH, TDS et conductivité

MOOV Salt Pen 4-in-1 – Salinity, pH, TDS, and conductivity

The MOOV Salt Pen is a precise and versatile electronic tester designed to quickly analyze the water quality of your salt pool, spa, or basin. Compact and easy to use, it provides reliable measurements of essential parameters for the proper functioning of your salt system in seconds.
  • Reference: MOOVMCSALTPEN
  • Brand: MOOV
$41.99 $99.99

Pickup available at Piscine Hippocampe succursale

Usually ready in 24 hours

In the box

What you receive.

  • 1 testeur électronique MOOV Salt Pen MCSALTPEN.
  • Solutions d’étalonnage et accessoires non annoncés comme inclus.

Choose with confidence

The product in detail.

The MOOV Salt Pen MCSALTPEN measures water salinity, pH, total dissolved solids (TDS), and conductivity. Its portable design and digital display make it easy to test pools and spas.

Specifications and references

  • Reference: MCSALTPEN; SKU: MOOVMCSALTPEN
  • Salinity: monitors salt concentration
  • pH: measures acidity or alkalinity
  • TDS: total dissolved solids
  • Electrical conductivity (EC)
  • Portable electronic tester with digital display

What’s included

  • 1 MOOV Salt Pen MCSALTPEN electronic tester.
  • Calibration solutions and accessories are not listed as included.

Use and care

Select the mode and check the unit before each reading. Follow the instructions for measuring, rinsing, storing the probe, and calibrating with solutions suited to the parameter. Compare the results with the recommended ranges for your system.

Frequently asked questions

Which parameters does the Salt Pen measure?

Salinity, pH, total dissolved solids (TDS), and electrical conductivity (EC).

Does it also measure chlorine?

No. The four listed measurements do not include chlorine. Use a separate disinfectant test.

Are TDS and salinity the same reading?

No. TDS and salinity are different measurements. Select the correct mode and check the unit before interpreting the result.

Does the device need to be calibrated?

Follow the manufacturer’s calibration procedure and use solutions suited to the parameter being measured.

What salt level should I aim for?

Use the range specified by the manufacturer of your salt system. The device’s measurement range should cover this requirement.

How should I care for the probe?

Follow the instructions for rinsing and storage; follow the probe-specific guidelines after each use.

See also: Pool and spa water tests.

Useful details.

Quels paramètres mesure le Salt Pen?
La salinité, le pH, les solides dissous totaux (TDS) et la conductivité électrique (EC).
Mesure-t-il aussi le chlore?
Non. Les quatre mesures annoncées ne comprennent pas le chlore. Utilisez un test de désinfectant distinct.
Les TDS et la salinité sont-ils la même lecture?
Non. Les TDS et la salinité correspondent à des mesures différentes. Sélectionnez le bon mode et vérifiez l’unité avant d’interpréter le résultat.
Faut-il étalonner l’appareil?
Suivez la procédure d’étalonnage du fabricant et utilisez les solutions adaptées au paramètre mesuré.
Quel taux de sel faut-il viser?
Utilisez la plage prescrite par le fabricant de votre système au sel. La plage de mesure de l’appareil doit couvrir ce besoin.
Comment entretenir la sonde?
Respectez la notice pour le rinçage et le stockage; les consignes propres à la sonde doivent être suivies après chaque utilisation.
A landscaped outdoor space

The Hippocampe council

The right product.
The right advice.

A question about compatibility, selection, or maintenance? Our team is here to support you before and after your purchase.

Request a quote