HST Pro-Tex cover for DreamMaker Cabana / CrossOver – 80 x 80 in

Replace your compatible DreamMaker Cabana or CrossOver spa cover with this 80 x 80 in. black Pro-Tex HST Premium cover. Its 1.5 lb/ft³ foam, 4 to 2 in. taper, and 6 mil heat-welded vapor barrier provide an insulating construction designed to help preserve heat between swims. Check the corners, skirt, and fold direction to choose the correct configuration.

Precise measurements to replace your cover

This square configuration measures 80 x 80 in. and has 18 in. radius corners. Its 7 in. skirt with a center overlap completes the perimeter coverage. The radius refers to the corner curve: it is not a straight 18 in. cut. A cover with the same length and width may therefore fit differently if its corners or skirt do not match.

Foam insulation, taper, and protection

The 1.5 lb/ft³ foam and full heat seal help limit heat loss when the cover is properly fitted and closed. The 6 mil heat-welded vapor barrier protects the foam from moisture transfer. The 4 in. center-to-2 in. edge taper encourages water drainage; standing water and snow accumulation must still be removed.

Black Pro-Tex: an outdoor-use finish

HST Pro-Tex is solution-dyed polyester coated with polyurethane to protect the surface from water. The materials are UV-treated and mildew-resistant. The manufacturer states that Pro-Tex fabric is 25% lighter than vinyl; this comparison applies to the covering, not the total cover weight.

Features of this configuration

• Cover manufacturer: HST
• Application: Compatible DreamMaker Cabana / CrossOver
• SKU: HSTBCOUVERTDREAM8080AB
• Exterior dimensions: 80 x 80 in.
• Thickness: 4 in. at the center to 2 in. at the ends
• Corner radius: 18 in.
• Skirt: 7 in. with a center overlap
• Covering: Pro-Tex Grade A
• Color: black
• Foam density: 1.5 lb/ft³
• Vapor barrier: 6 mil, heat-welded
• Full heat seal

Confirm Cabana or CrossOver compatibility

DreamMaker recommends identifying the model number on the spa plate before choosing a cover. Cabana and CrossOver are product lines: also compare the year, measurements, corner radius, fold direction, and attachment position. This replacement cover is manufactured by HST for the compatible DreamMaker configurations indicated.

Installation and care

Place the cover evenly on the spa, check that it rests around the perimeter, and align the attachments. Also check compatibility with your cover lifter. Clean with a soft cloth, water, and mild soap. Carefully remove snow with a broom, not a shovel, and gently release the seal before lifting the cover; do not pull on the skirt.

What's included

1 black HST Premium Pro-Tex spa cover, 80 x 80 in., in the configuration indicated for compatible DreamMaker Cabana and CrossOver spas. The spa and cover lifter are sold separately.

Need help before ordering?

Locate the model number on the spa plate. Compare the 80 x 80 in. dimensions, 18 in. radius, 7 in. skirt, and fold direction with your current cover. To have the fit confirmed, provide these measurements, the spa year, and photos, mentioning SKU HSTBCOUVERTDREAM8080AB.

Confirm the delivery or pickup terms for this bulky cover before ordering.