MOOV Reversible MR80 pool heat pump – 80 000 BTU

MOOV Reversible MR80 Pool Heat Pump – 80,000 BTU

Extend your swimming season with the Moov Reversible MR80 80,000 BTU pool heat pump.

Designed to efficiently heat residential pool water, the Moov Reversible series combines reverse-cycle defrosting, a spiral titanium heat exchanger, a dual-rotary compressor and a mechanical design intended to provide stable, quiet operation.

With its 80,000 BTU capacity, the MR80 is an appealing option for homeowners who want to maintain a comfortable water temperature longer in spring and fall.

80,000 BTU heating capacity

The Moov MR80 has a rated capacity of 80,000 BTU, allowing it to heat and maintain the water temperature according to your installation conditions.

A heat pump’s actual performance varies depending, among other factors, on:

• Pool volume
• Outdoor temperature
• Desired water temperature
• L’humidity
• L’wind exposure
• L’sunlight
• Number of circulation hours
• L’use of a solar cover or not

Proper sizing is essential to achieve performance suited to your pool.

Reverse-cycle defrost

The Moov Reversible series uses a reversible defrost system. When frost forms on the evaporator, the heat pump can temporarily reverse its cycle to speed up defrosting before resuming heating.

This technology is particularly useful at the beginning and end of the season, when outdoor temperatures are cooler.

Benefits

• Faster defrosting
• Fewer interruptions caused by frost
• Better suited to cooler periods
• Helps extend the swimming season even further

Spiral titanium heat exchanger

The Reversible series features a spiral-design titanium heat exchanger. According to Moov, this design provides approximately 30% more heat exchange surface area, promoting heat transfer to the pool water.

Titanium also offers excellent corrosion resistance, making it a particularly suitable material for pool equipment.

Main benefits

• Efficient heat transfer
• Durable construction
• Excellent corrosion resistance
• Adapted to a pool environment
• Heat exchanger installed in a PVC housing on the Reversible line

Fixed-speed dual rotary compressor

The Moov Reversible is a traditional fixed-speed heat pump rather than a Full-Inverter model. Moov uses a dual-rotor mechanism designed to balance vibrations produced during operation.

This design helps provide:

• Stable operation
• Reduced vibration
• Quieter operation
• A simple, proven mechanical design

Sound-insulated design

Moov uses vibration-absorbing materials and walls around the mechanical chamber to limit noise from the heat pump’s main components.

To help ensure quiet operation, it is also important to:

• Install the heat pump on a solid, level base
• Maintain the recommended clearances
• Ensure adequate airflow
• Avoid placing the unit in an enclosed space
• Follow the manufacturer’s installation recommendations

Smart control and connectivity

The Moov Reversible line is equipped with a smart control thermostat and offers Wi-Fi connectivity for easier heat pump management.

The control system lets you manage the temperature and operation of the unit according to the functions available in the installed configuration.

A heat pump designed to extend the season

Reverse-cycle defrosting is a particularly valuable feature in a climate where temperatures can be lower in spring and fall.

It allows the heat pump to better manage frost formation and continue heating when conditions remain within its operating range.

L’importance of a solar blanket

To optimize a heat pump’s performance, using a solar blanket is strongly recommended.

It helps:

• Reduce heat loss overnight
• Limit evaporation
• Maintain a more stable water temperature
• Reduce the required operating time
• Retain more of the heat collected

Key features

Brand: Moov
Series: Reversible
Model: MR80
Type: Pool heat pump
Rated capacity: 80,000 BTU
Technology: Fixed speed
Defrost: Reverse cycle
Heat exchanger: Spiral titanium
Compressor: Dual rotary
Control: Smart thermostat
Use: Residential pool heating

Size your heat pump correctly

The required capacity depends on more than just the pool's water volume.

To select a suitable heat pump, you should also consider the region, pool exposure, desired temperature, length of the season, and whether a solar cover will be used.

A properly sized heat pump can generally reach the desired temperature more efficiently and maintain it better when outdoor conditions become cooler.

Professional installation recommended

The heat pump must be installed in accordance with the manufacturer's instructions and applicable standards.

L’installation must include:

• A solid, level base
• Sufficient airflow
• Adequate clearance around the unit
• Plumbing that provides the appropriate flow rate
• Proper condensate drainage
• An electrical circuit suited to the unit
• Proper grounding

Electrical connection must be completed by a qualified professional.

Why choose the Moov Reversible MR80?

• 80,000 BTU capacity
• Reverse-cycle defrost
• Spiral titanium heat exchanger
• Dual rotary compressor
• Fixed-speed design
• Sound-insulated mechanical compartment
• Smart control thermostat
• Designed to extend the swimming season
• Construction suited to residential pools

Enjoy your pool for longer

The Moov Reversible MR80 80,000 BTU heat pump offers an appealing combination of power, simplicity, and technology designed to heat a residential pool.

Its reverse-cycle defrost, titanium heat exchanger, and dual rotary compressor make it a practical solution for maintaining comfortable water temperatures and enjoying your pool longer throughout the season.

Available at Piscine Hippocampe.

Warranty for installation in Quebec

For a Moov Reversible MR80 heat pump installed in Quebec: 6-year warranty on parts and 6-year warranty on labor. The manufacturer's terms and exclusions apply.