MOOV JustSalt MC130JUST salt system – 130 000 L

The MOOV JustSalt MC130JUST produces chlorine for your pool from the salt dissolved in the water. Designed for pools up to 130,000 L in regular salt mode, it reduces the need for manual chlorine additions and lets you adjust production according to swimming needs.

JustSalt: monitor your system from your phone

JustSalt adds a Bluetooth connection with the ePool app so you can view data and adjust settings near the system. Monitoring includes salt, temperature, and cell information. pH monitoring depends on the probes and configuration installed; it does not mean that pH is corrected automatically.

Choose the mode based on your pool volume

In regular salt mode, we recommend a target of approximately 3,500 ppm for a stated capacity of up to 130,000 L. In Low Salt mode, at approximately 1,500 ppm, the capacity is reduced to 93,000 L. Have the salinity measured before adding salt and follow the instructions for the installed model.

A temporary boost with Boost mode

The Boost function temporarily increases production to 125% for 24 hours. It can help when demand increases, for example after a very busy day. Always check the chlorine with a test: this function alone does not guarantee treatment of green or cloudy water.

MC130JUST features

Range: MOOV JustSalt. Model: MC130JUST. Cell: 7 plates. Two salinity modes: regular and Low Salt. Stated limited warranty: 3 years on the cell and housing, subject to the manufacturer's conditions.

A properly sized system makes maintenance easier

Maximum capacity is a guideline: filtration time, sunlight, temperature, and usage affect chlorine demand. Maintain a capacity margin, particularly if your pool volume is close to 130,000 L or if you want to use Low Salt mode.

Support from Piscine Hippocampe in Delson

Our team can help you choose the model based on your water volume and equipment. Prepare photos of the plumbing and the model numbers of your pump and current system. Our water analysis service also helps you monitor essential parameters after start-up.