Hot Spring CoverCradle I Cover Lifter – 72577

The Hot Spring CoverCradle I 72577 uses two gas springs to assist with opening and closing a compatible cover. When open, the cover remains supported behind the spa.

Open the spa and keep the cover within reach

• Assisted by two gas springs
• Approximate rear clearance: 24 in
• Approximate side clearance: 3 in
• For covers and spas compatible with the 72577

How it works

Two gas springs assist with moving the cover. The mechanism supports it behind the spa when open.

Space requirements

The manufacturer specifies 24 in at the back and 3 in on the sides. Actual clearances may vary depending on the spa model and its location. Also check the overhead clearance.

Compatibility and installation

Confirm the part number 72577, the spa model and year, and the cover's mounting points. Follow the installation instructions specific to your equipment.

An unusually heavy or warped cover should be inspected before using the mechanism. Keep the cover's path and access to the panels clear.

In the box

• 1 Hot Spring CoverCradle I cover lifter assembly, part number 72577.

Useful details

How much space is needed behind the spa?

24 in according to the manufacturer's specifications. Actual clearance may vary depending on the model and installation.

How much side clearance is needed?

3 in according to the manufacturer's specifications. Also check for obstacles and access to the equipment.

How does this mechanism work?

Two gas springs assist with moving the cover. The mechanism supports it behind the spa when open.

Does it fit all covers?

No. Check the part number 72577, the spa model and year, and your cover's mounting points.

Is the cover included?

No. This listing is for the cover lifter; the spa cover is sold separately.

What should I check when installing it under a gazebo?

Measure the overhead clearance and the cover's full path. It must be able to move without touching the roof, walls, or other obstacles.