Hydro-Quip heating element 45BNCTTM – Titanium, 4.5 kW

The Hydro-Quip 45BNCTTM titanium heating element is a 4.5 kW replacement heater at 240 V. Its BowTie shape and offset terminals match certain compatible Balboa M7, Hydro-Quip, and Aquatemp assemblies.

Technical specifications

• Listed part number: 45BNCTTM
• Power: 4.5 kW (4,500 W) at 240 V
• Sheath: titanium
• Shape: BowTie / butterfly
• Configuration: offset electrical terminals
• Advertised length: 9¾ in (approximately 24.8 cm)
• Mounting hardware included according to this offer
• Piscine Hippocampe SKU: CENTELE-45-BNC-TTM

Compare the fit inside the heating tube

Check the 9¾ in length, shape, terminal spacing, and terminal position against your current heating element. The Balboa M7 designation refers to compatible assemblies and does not guarantee fitment on all heaters in this range.

Keep the power rating specified by the control

This model is rated at 4.5 kW at 240 V. Have this rating confirmed against the control box and electrical circuit before replacing an element with one of a different power rating.

Single heating element with hardware

This offer allows you to replace the element in a compatible tube. Have the condition of the tube, gaskets, and sensors checked to determine whether this repair is appropriate.

Installation and maintenance

Have diagnosis, part selection, and wiring performed by a qualified spa technician. Installation must comply with the system manual. Follow the manufacturer's recommendations for circulation, filtration, and water balance.

Offer contents

One Hydro-Quip 45BNCTTM titanium heating element with mounting hardware. The heating tube, M7 sensors, and other components are sold separately; confirm which gaskets are required.

Have the replacement confirmed

To verify this replacement, send Piscine Hippocampe a photo of the label and connections on your current part, the spa model and year, and the control box part number. Mention SKU CENTELE-45-BNC-TTM.